• TOP
• >
• ATP Electronics

ATP Electronics is a leading solution provider of high performance, high quality and durable NAND flash and DRAM memory modules. With over twenty years of experience in service based memory products, ATP continues to focus on mission critical applications such as industrial/automation, telecom, medical, automotive, and enterprise computing where high levels of technical expertise, manufacturing quality, and wide operating temperature ranges are required. A certified Eco/Green partner of tier one OEMs, all ATP products are fully RoHS and China RoHS compliant. A true manufacturer, ATP offers in-house design, testing, and product tuning at both system and component levels. In addition, ATP supply chain support includes controlled/fixed BOMs and long-term product life cycles. The ATP brand continues to grow through industrial OEM sales channels with offices in Japan, USA, Europe, and Asia. ATP offers worldwide support in both engineering and sales.

DRAM

ATP Ultimate 16GB DDR3 Solutions

“High density, Low power consumption 1.35V, High speed 1600 MHz , High reliability, Cost effective” DRAM modules that ideally suited for Intel Atom servers, AMD DDR3 platforms and high performance computing applications.

DDR3L-1600

■Key Features
• Density: 16GB
• Chipkill support
• Fly-by command/address/control bus with on-DIMM termination
• Higher bandwidth performance, effectively up to 1866 MT/s
• Better performance at low power; 1.5V (Normal) and 1.35V(Low Voltage)
• New DDR3L ECC SODIMM technology capable of operating at 1866MHz

P/N (product code)	Product name
XL16A8E4GSPNE-CN	DDR3L-1600 240P 4GB Reg ECC DIMM, 1.35V	Click here for more detail
XQ16D8E4GSPE-CN	DDR3L-1600 240P 4GB Unb ECC DIMM, 1.35V	Click here for more detail
XQ1618N4GSPE-CN	DDR3L-1600 240P 4GB Unb non-ECC DIMM, 1.35V	Click here for more detail
XW1638N4GSPE-CN	DDR3L-1600 204P 4GB Unb non-ECC SODIMM, 1.35V	Click here for more detail

ATP DDR4 Module

DDR4 is a high-speed dynamic random-access memory which internally configured as an 8-bank DRAM and the device uses an 8n-prefetch architecture to achieve high-speed operation. The 8n-prefetch architecture is combined with an interface designed to transfer two data words per clock cycle at the I/O pins.
ATP DDR4 module is the evolutionary transition from DDR3, supporting features and functions that offer lower power, higher performance, and better manufacturing ability over earlier DRAM products. The features supported by DDR4 are well suited for customers who are under pressure to increase the bandwidth capabilities of their equipment to support the growth of online traffic.

DDR4-2400

■Key Features
• Density: 4GB
• Increased performance and bandwidth (up to 3200 MT/s)
• Decreased voltage for better power consumption
• Provides better reliability, availability and serviceability (RAS) and improves data integrity

P/N (product code)	Product name
X4B04QG8BLRCSE-E-CN1	DDR4-2400 288P 4GB Reg ECC DIMM	Click here for more detail

SD, microSD cards

ATP Industrial Grade SD/ microSD

ATP’s advanced MLC ( aMLC) SD / microSD cards
ATP’s advanced MLC (aMLC) SD/microSD cards are designed for industrial applications such as surveillance, medical imaging, transportation, and data logging. The ATP aMLC cards are high-performance, high-endurance, and highly reliable at a very cost-effective price. Compared to commercial MLCs, aMLCs provide 13 times the endurance, 1.5 times the performance, and 5 times the data retention. The aMLC cards are ruggedized through a SIP manufacturing process, allowing them to operate in the most demanding environments. Advanced firmware features and Flash management capabilities combined with ATP’s proprietary mass-production level testing ensures industry leading data integrity and reliability in a wide variety of applications.
ATP’s industrial grade SLC SD/microSD cards
ATP’s industrial grade SLC SD/microSD cards are designed for mission critical environments such as in the military, aerospace, aviation, medical, and automotive fields. The ATP cards are ruggedized through a SIP manufacturing process allowing them to operate in the most demanding environments. Advanced firmware features and Flash management capabilities combined with ATP’s proprietary mass-production level testing ensures industry leading data integrity and reliability in a wide variety of applications

aMLC (advancedMLC) NAND flash

ATP XE SD w/o Label (SD3)aMLC

ATP XE microSD + Logo (UD3)aMLC z

SLC NAND flash

ATP IG SD w/o Label (with FCC & WEEE)SLC

ATP IG microSD + Logo (with FCC & WEEE)SLC

■Key Features
• Advanced Wear Leveling algorithm
• Bad Block Management
• Read Disturb Protector – AutoRefresh to ensure data integrity during read operation
• IP67 waterproof/Dustproof test (IEC 60529)
• Highly reliable and pass environmental test (Bend/Torque/Salt Spray/Solar radiation)
• ESD resistance
• Life Monitor (Note : The compatibility and support of Life Monitor may vary on different platform/operation system)

P/N (product code)	Product name
AF4GSD3A-CHE	ATP XE SD 4GB w/o Label (SD3)aMLC	Click here for more detail
AF4GUD3A-CHE	ATP XE microSD 4GB + Logo (UD3)aMLC	Click here for more detail
AF2GSDI-CHE	ATP IG SD 2GB w/o Label (with FCC & WEEE)SLC	Click here for more detail
AF2GUDI-CHE	ATP IG microSD 2GB+ Logo (with FCC & WEEE)SLC	Click here for more detail

Embedded SSDs

ATP Industrial Grade Embedded SSD Module

Embedded Solid State Drives are designed for small form factor embedded storage with space constraints and high performance requirements for enterprise and industrial applications..

ATP SATA III M.2 2242, 32GB (MLC), Power Protector

■Key Features
• High performance with SATAIII interface
• Adheres to M.2 specification v1.0 defined by PCI-SIG
• Sub-Page 4KB data management
• Idle clean FW algorithm to optimize write performance
• Enhanced endurance by global wear-leveling & DRAM flush cache efficiency
• Power Protector, data integrity under power-cycling
• NSA compliant secure erase
• SMART function support by ATA CMD
• Support TRIM command (Windows 7 and up, latest Linux Kernel)

ATP SATA III mSATA, 16GB (MLC), Power Protector

■Key Features
• Adheres to the JEDEC mechanical specification MO-300A
• Built-in hardware-based data protection technology during powe r failure – PowerProtector
• Ultra high performance solution for small embedded form factors and industrial applications
• Supports S.M.A.R.T. ATA feature set
• RoHS compliant and CE/FCC certification

ATP SATA III Cfast + Label, 16GB (MLC), Power Protector

■Key Features
• SLC (Single-Level-Cell) NAND Flash with a longer lifespan
• Enhanced endurance with Advanced Wear Leveling algorithm
• Bad Block Management
• Read Disturb Protector – AutoRefresh to ensure data integrity during read operation
• Built-in hardware-based data protection technology during power failure – PowerProtector
• Supports S.M.A.R.T. ATA feature set

P/N (product code)	Product name
AF32GSMIA-CHE	ATP SATA III M.2 2242, 32GB (MLC), Power Protector	Click here for more detail
AF16GSMHI-CHE	ATP SATA III mSATA, 16GB (MLC), Power Protector	Click here for more detail
AF16GCS-CHE	ATP SATA III Cfast + Label, 16GB (MLC), Power Protector	Click here for more detail