- Evaluation Development Tools
By Category – Evaluation Development Tools
Programmable Logic Evaluation Development Tools
Amplifier Evaluation Development Tools
Clock & Timer Evaluation Development Tools
Data Converter Evaluation Development Tools
Solution Board Development Kits
Application Development Tools
DSP Evaluation Development Tools
Interface Evaluation Development Tools
Power Management IC Evaluation Development Tools
RF and RFID Starter Kits
Other Evaluation Development Tools
Popular evaluation development tools
- TOP 10 selling tools of the second half of 2017
STM32 LoRa Discovery kit
MSP430 LaunchPad Value Line Development kit
New Products & Recommended ItemsRenesas Synergy™ Development Environment (Tools and Kits)
We offer various board development environments
such as Starter Kits (SK) and Development Kits (DK)Renesas Starter Kit+ for RX65N
The Renesas Starter Kit+ for RX65N is
the best starter kit for the introduction
Popular ItemsE1 [R0E000010KCE00]
The E1 emulator is an on-chip debugging
emulator compatible with major Renesas microcomputers
mbed development environment responding & Arduino compatible development board
that quickly realize creation of prototypes based on Cortex-M microcomputer
Using the STM32 Nucleo Board allows you to prototype easily and allows anyone to try new ideas in short amounts of time.
The STM32 Nucleo Board has a common Arduino connector and ST Morpho header and can easily be expanded using a number of dedicated application hardware add-ons.
The STM32 Nucleo board has built-in ST-LINK/V2-1 debugger and programmer.
The STM32 Nucleo board has the STM32 software HAL library and various software examples and it seamlessly works with the wide development environment of IAR EWARM, Keil MDK-ARM, mbed, and GCC based IDE.
Users of the STM32 Nucleo board can access the mbed online resources (compiler, C/C++ SDK, and developer community) at www.mbed.org for free and can build complete applications in just minutes.Characteristics
- Equipped with STM32 microcomputer in 64-pin package
- Built-in St-Link/V2-1 debugger and programmer
- Vast expansion function with dedicated shield
- Corresponds to Arduino™ Uno rev 3 connection
- Access to all terminals of microcomputer via ST Morpho connector
- Direct access to mbed online resources
- IAR, Keil, and GCC based IDE (Atollic etc.) support
STM32 Nucleo Expansion Board/X – Nucleo Series
The STM32 Nucleo Expansion Board meets all design requirements.
- ST products can be evaluated by combining with ST’s microcomputer STM32
- Utilizing the functions and performance of ST product portfolio, applications can be realized based on STM32
These expansion boards have a common pin assignment for connecting with the microcomputer.
- Equipped with Arduino Uno R3 connector
- Equipped with Morpho connector enabling more advanced connection
Each expansion board is supported by an STM32 based software module.
Combined with the STM32 Nuclio board, a unified and adaptive approach for application development, prototyping, and product evaluation is made possible.
Wearable sensor unit reference design for fast time to market
The STEVAL-WESU1 is a reference design developed and optimized for developers to support the development of the latest wearable and portable applications.
The STEVAL-WESU1 firmware packaged is based on STM32Cube software technology.
The driver equipped STM32L151VEY6 controls 3 sensors (LSM6DS3, LIS3MDL and LPS25HB), Bluetooth low energy network processor (BlueNRG-MS), and battery management ICs (STC3115 and STNS01).
STM 32 for LoRa WAN
LoRa, a robust and low power wireless technology, can easily construct IoT edge nodes regardless of the environment, such as long distance communication (several to several tens of killometers) or communication between multiple floors in a skyscraper.
ST, a major member of the LoRAWAN Alliance, is offering a free software library compatible with the LORaWAN standard for the ultra-low power consumption microcomputer STM32L series based on the partnership with Semtech which provides wireless IC for LoRa.
PSoC 4 BLE Pioneer Kit (CY8CKIT-042-BLE/CY8CKIT-042-BLE-A)
One-chip solution for low power consumption sensor based IoT system design
1. Realize complete system design with PSoC Creator
2. Simplified BLE protocol stack and profile configuration
with easy-to-use BLE Component
3. Simplifying RF board design by integrating balun
4. Equipped with programmable AFE and digital logic
along with CapSense, ARM Cortex-M0 CPU and BLE wireless technology
5. Provides user-friendly power consumption modes with five flexibles
PSoC Analog Coprocessor Pioneer Kit (CY8CKIT-048)
Equipped with multiple sensors, it is ideal for IoT application design
Can easily customize various sensors
The PSoC Analog Coprocessor has the following analog sensors:
PIR motion sensor
Inductive proximity sensor
Ambient light sensor
Form factor compatible with Arduino® shield 1 board
On-chip system debugging made possible with PSoC5 programmer and debugger
Equipped with 1Mb serial F-RAM2 for nonvolatile data storage outside chip
Solar-Powered BLE Sensor Beacon Reference Design Kit (CYALKIT-E02)
An ultra-low power consumption energy harvesting BLE solution
designed ultra-compact and solar power wireless sensor
The CYALKIT-E02 Solar-Powered BLE Sensor Beacon Reference Design Kit (RDK) is designed to quickly design ultra-small solar power driven IoT devices for BLE wireless communication. This RDK includes a Solar BLE Sensor and BLE-USB Bridge and a Debug Board. The Solar BLE Sensor consists of Cypress’s Energy Harvesting Power Management IC (PMIC), S6AE103A and EZ-BLE™PRoC™ Module (CYBLE-022001-00), designed to operate without a battery, it harvests energy from ambient light.
New Products & Featured ProductsiMOTION™ for motor control solutions
Target ideal applications are for household electronics, air conditioning systems, pumps, ventilators, and multicopters (drones).
Currently, the iMOTION™ solution is already used in energy-efficient and cost-effective BLDC motor controls in more than 65 million units such as air-conditioning systems and multicopters around the world.
Technologies and variation details on the iMOTION™ solution platform and its modular application design kit can be found in
Digital Motor Controller (iMOTION™)andiMOTION™Modular Application Design Kit.3D Magnetic Sensor
TLV493D-A1B6 2 GO KIT
The 3D Magnetic Sensor 2GO is a low-cost evaluation board equipped with a magnetic sensor for 3 dimensional measurement combined with ARM®Cortex™-M0 CPU. The 3D Magnetic Sensor 2GO is a complete set of onboard devices including an onboard debugger. In addition to the 2GO kit, we also include a joystick and a rotary nob for easier evaluation all for a great price.
Download the 2GO kit GUI (Graphic User Interface) to use for freehere.Magnetic Current Sensor
TLI4970050 2 GO KIT
The Current Sensor 2GO is a low-cost evaluation board combining current sensor and ARM® Cortex™-M0 CPU. Current Sensor 2Go is a complete set of onboard devices including an onboard debugger.
Download the 2GO kit GUI (Graphic User Interface) to use for free here.
It is a precision current sensor for industrial applications based on Infineon’s Hall technology backed by achievement.This product, which adopts the coreless concept, has significantly reduced mounting area over existing solutions.It is an easy-to-use full digital sensor with no need for an external calibration, external components such as A/D converters and OP amplifiers, or reference voltage.This greatly simplifies the entire mounting process and can dramatically reduce PCB space and cost.It is ideal for applications such as solar inverters, charging devices, power supply devices, as well as control of electric drive devices and power saving LED lighting devices.
New Products & Featured ProductsThe EVAL-ADF7021DBZx is an evaluation module for
the ADF7021 transceiver device. These modules have
a full set of development functions.
Connects to the EVAL-ADF70xxMBZ2 motherboard.
ADF7021 device setup of EVAL-ADF7021DBZ3
(For 431-470 MHz frequency operation)
ADF7021 device setup of EVAL-ADF7021DBZ5
(For 80-650 MHz frequency operation)
ADF7021 device setup of EVAL-ADF7021DBJZ
(For 426-435 MHz frequency operation)
SMA antenna connectorThe ADXB 203 EB is a simple evaluation board and
can evaluate the performance of the 2 axis ± 1.7 g
acceleration sensor “ADXB 203” in a short amount of time.
The ADXB 203 EB has a 5-pin 0.1 inch spaced header that
has access to all power lines and signal lines and can be
connected to a prototyping board (bread board) or wire
using standard plugs.
There are four holes for mounting the ADXB 203 EB onto
the application board.
The size of the D04837-0-4/04(0)-JADXB203EB is
20 mm × 20 mm, and there are mounting holes at
15 mm × 15 mm intervals at the four corners of the PC board.
ADXL001: High Performance, Wide Bandwidth Acceleration Sensor
SDP-B Evaluation Board
– USB-to-PMBus Controller for Use with LTpowerPlay
Power Management, Battery Charger Evaluation Board
LTC5549 Demo Board
RN4020 Bluetooth Low Energy Module
Evaluation Development Demo BoardPG164130
PICkit 3 In-circuit DebuggerDV164035
MPLAB ICD 3 In-circuit DebuggerDV164131
PICkit 3 Debug ExpressDV007004
MPLAB PM3 Universal Device Programmer/
REAL ICE In-circuit EmulatorDM320002
PIC32 I/O Expansion Board
MCIMX6Q-SDBFor Freescale smart devices
Developers using the Smart Application Blueprint for Rapid Engineering (SABRE) board can develop quad-core processing and low power consumption state-of-the-art multimedia and graphics applications with the i.MX 6 Quad ARM ® Cortex ™ – A 9 application processor.
The SABRE board for smart devices is a low-cost but rich featured development platform that realizes simple product design. Developers can utilize the majority of the major functions of the i.MX 6Quad processor, while maintaining compatibility of the circuit diagram with i.MX 6 Quad, i.MX 6 Dual, i.MX 6 Dual Lite, and i.MX 6 Solo’s designs.
This gives you a basic product design that acts as a starting point for complex designs and shortens the time to market.FRDM-K64F is an ultra-low cost development platform for the Kinetis K64/K63/K24 microcontroller. The FRDM-K64F hardware is a form factor compliant with the Arduino ™ R3 pinout and has a wide range of expansion board options.
The FRDM-K64F includes a 3-axis digital acceleration sensor/magnetic sensor that realizes the entire E-Compass function, 2 push buttons that support bidirectional communication with 3 color LEDs, a microSD card slot for memory expansion, there are options for communication such as onboard Ethernet port and header for adding Bluetooth and 2.4GHz radio modules, enabling rapid prototyping.
The major feature of the FRDM-K64F platform is that it has OpenSDAv2. OpenSDAv2 is a Freescale open source hardware embedded serial/debug adapter that runs open source boot loaders.
This circuit has several options for serial communication, Flash programming, and execution control debugging.FRDM-KL25Z is an ultra-low-cost development platform equipped with the Kinetis L series KL1x/KL2x microcontroller family based on the ARM® Cortex ™ -M0+ processor.
Easy access to microcontroller I/O, battery power supply compatible, low power consumption operation, compliant with standards-compliant expansion board options, and a built-in debug interface for Flash programming/execution control.
This allows you to take advantage of mbed.org free of charge, online software development kits, tools, reusable code (meaning there is no need for downloading, installing, licensing), giving you complete access into the active developer community.
Wireless LAN Module SX-ULPANIEEE 802.11a/b/g/n Compatible + TCP/IP Embedded with Onboard Antenna IoT Wireless LAN Module
SX-ULPAN is an ultra-small, low power consumption wireless LAN module for microcontroller devices compatible with IEEE 802.11a/b/g/n.
This module uses the chipset QCA4004 by Qualcomm Atheros, who pride themselves with the industry’s highest level in low power consumption performance, and realizes business applications requiring miniaturization and low power consumption of embedded equipment and wireless LAN of MCU equipment for industrial use(-40 to 85 °C ).
Also, because this module has a function to offload the wireless driver and TCP / IP protocol (capture processing to the lower layer), even MCU devices with limited resources such as CPU and ROM/RAM, the installation of wireless LAN function is realized while suppressing the rise in power consumption, providing a link with tablets and IoT solutions.
Model ARDUINO Interface Compatible Evaluation Kit NXP TOWER SYSTEM Compatible Evaluation Kit Catalogue SPI version SX-ULPAN-2401-SHIELD SX-ULPAN-2401-EVK UART version SX-ULPAN-2402-SHIELD SX-ULPAN-2402-EVK UART version SX-ULPAN-2404-SHIELD SX-ULPAN-2404-EVKIoT Wireless Development Kit for RX600/RL78 SeriesGateway Development Kit that connects sensing devices with wireless LAN/BLE
The development of new service businesses collecting information on sensors used in various field and using IoT has become intensive.
However, there are many problems in actually deploying a device for IoT.
This product is a development kit to solve these problems and make it easy to deploy devices for IoT.
It provides total development environment of gateway connecting sensing devices and IoT with wireless LAN/BLE.
Product Name Part Number Catalogue Buy Gateway Set SX-ULPAN-DVK-GW01 Memory Expansion Board Gateway Set SX-ULPAN-DVK-GWEM01 BLE Sensor Set SX-BLE-DVK-S01 WLAN Sensor Set SX-ULPAN-DVK-S01